PVC Film Fill of type C10.19

About PVC Film Fill of type C10.19

PVC Film Fill of type C10.19,UV stabilised with carbon black ,Black in colour, Double edge folded.Thickness :- 0.25 mm

Supplying  of various types of fill design suitable for different water quality. These fill Media are manufactured meeting CTI standards.

Film Fill : C10.12 / C10.19 / C10.27

Advantage of  film fill.

Continuous Forming : Continuous forming process allows free flow of material during the stage of formation. Additional requirement of raw material is met hence no thinning takes place at crests & troughs.

Double Edge Folding :  manufacturing technique has the ability to fold the edges of the sheets providing stronger edges, which gives extra protection against water loads and shear force form beams. It also protects the fill from damages during installation & maintenance.

Uniform Thickness : Provides uniform strength in fill sheets all along the fill surface.

Micro structure : Unique shape and dimension provides long retention time and thus longer time for heat transfer.

Longer Length : Allows the structural designer to reduce number of support beam thus in turn reduces the pressure drop and cost of construction.

In Conventional vacuum forming the sheets being formed needs anchoring both ends of the sheet, which results in stretching of material. Weak spots of lower thickness at crest and trough and at times also on flute surface are formed. Vacuum-formed sheets suffer from unpredictable thickness due to material stretching during the process. reduction in thickness is to the tune of 40%. However, by leaving one end free during continuous roll forming,  avoids the undesirable results.

In conventional vacuum forming, the raw sheet is drawn. If corrugations are at 60, then the sheet must be stretched to cover about 1.4 times its original area.

Technical Specifications